Dremel and a sharpening stone fixes a couple of issues on my Singer 99K.

Before throwing out the corroded parts for my Singer 99K, the original needle plate and presser foot, I did a little aggressive clean up with a my Dremel, a grinder bit followed by an oil-stone. Off came the corrosion, but so did the mirror-like shine on both parts.
Are they still usable? Definitely yes, in fact the foot is now back on the machine as my standard working foot. I really like the 1/8" narrow leg on this foot. The needle plate looks fine, if a but dull, but again it is totally functional. However I am keeping the new plate on the machine as it has seam guide markings, unlike the original plate.

Original presser foot and needle plate have cleaned up to a usable condition.

Comments

Singer 99: Edge stitching attachment.

Looking like a weird set of ladders the Singer edge stitch attachment is one of the most versatile attachments I have, so I thought that I would share some of the ways it can be used. First, it is a very effective and almost faultless way to stitch at the edge of material. Remove the normal presser foot and attach the edge stitcher and you are good to go. I like to turn under 1/8-1/4" of fabric first, and either press or finger press a sharp edge in place. The video below details the full edge stitching process using the attachment. Singer edge stitching foot More edge stitcher techniques: Singer 99: Adding lace, ribbon etc to a garment edge with the edge stitching attachment

My primary machine: Toyota's Super Jeans 34 after 10 months use.

This is my Super Jeans 34. The big daddy of Toyota's Super Jeans machines with 34 stitch options. It's black, well actually it's more like a dark brown to my eyes. Like almost every domestic sewing machines today, it has a plastic exterior with a rigid metal frame inside. This makes for a lightweight machine, but one which can still punch its way through multiple layers of denim fabric with ease. So what drew me to this machine and what is it like to use? Well, first let me say that my partner has been using a Toyota Quiltmaster 226 for close to 5 years and swears by it as a real, un-fussy workhorse. She is a quilter and has made a multitude of quilts on her machine since we bought it, and it has been totally reliable. I have a Toyota 3304 over locker that I use for garment construction too. It took me a weekend to get to grips with a machine that uses 4 threads instead of two, but since then I loved using the 3304, it's a great over locker, quiet, easy to use, ...

The Hussif

A quick project that I did today was to make a Hussif which I found in the projects section of the Merchant & Mill "Sewing Book". A Hussif is a sewing roll of tools and thread inspired by the rolls that WW1 soldiers used to maintain their uniforms. My version, which is almost identical to the pattern in the "Sewing Book", holds a pair of small scissors, a tape measure, pack of Household needles, seam ripper, two pots of pins and two spools of heavy duty thread. The Hussif is not only a roll to store and protect the equipment, it also has a built-in pin cushion. As the Merchant and Mills pattern may be copyright, I have not included it here. I just need to find a couple of Tic-Tac boxes to hold the pins instead if the childproof "pill pots" which are a safe but a little on the chubby side.

Sewing on and Serging forward

Search This Blog